PurePlus Technology: The Future of Oil Filtration

Synthetic Media

PurePlus™ technology is a revolutionary process that creates high-performance synthetic motor oil from natural gas. This technology produces a base oil so pure that it's crystal clear and virtually free from impurities found in crude oil. This results in an engine oil with enhanced performance characteristics, including improved oxidation stability, low-temperature fluidity, and reduced volatility.

While PurePlus™ technology focuses on creating a superior base oil, advanced synthetic media technology in oil filters complements this by providing exceptional filtration. These filters utilize synthetic fibers, often blended with other high-performance materials, to create a filter media with a larger surface area and more consistent pore size than traditional cellulose-based filters.

This combination of a pure base oil from PurePlus™ technology and the advanced filtration of synthetic media oil filters offers several benefits:

Enhanced Engine Protection: The pure base oil, combined with the filter's ability to trap microscopic contaminants, ensures optimal engine cleanliness and protection from wear.

Improved Fuel Economy: The exceptional lubrication properties of the base oil and the reduced engine wear contribute to better fuel efficiency.

Longer Oil Life: The inherent stability of the synthetic base oil and the superior contaminant removal of the filter allow for extended oil change intervals.

The synergy between PurePlus™ technology and advanced synthetic media oil filters represents a significant leap in engine protection and performance. By combining a cleaner, more robust base oil with a highly efficient filtration system, this technological pairing ensures optimal engine health and longevity.

PurePlus Technology: setting a new standard in engine protection, ensuring a cleaner, more efficient drive.

Elias Davenport

99.9% Efficiency

PurePlus™ technology is a revolutionary advancement in oil filtration, achieving an astounding 99.9% efficiency. This level of performance surpasses conventional oil filters, ensuring superior engine protection and longevity.

Traditional oil filters often struggle to capture the smallest and most damaging particles, which can lead to premature wear and tear. PurePlus™ technology utilizes a cutting-edge synthetic media that acts like a microscopic web, trapping even the tiniest contaminants. This advanced media boasts a significantly larger surface area compared to conventional cellulose filters, allowing for greater dirt-holding capacity without compromising oil flow.

The exceptional 99.9% efficiency rating means that PurePlus™ filters can remove virtually all particles larger than 20 microns. To put this into perspective, a human hair is approximately 70 microns in diameter. This remarkable filtration capability ensures that your engine's vital components are shielded from harmful abrasives, preserving their performance and extending their lifespan.

Moreover, PurePlus™ technology maintains its high efficiency rating throughout the filter's service life. Unlike conventional filters that can become clogged and less effective over time, the synthetic media in PurePlus™ filters resists degradation, providing consistent protection for the long haul.

By choosing oil filters equipped with PurePlus™ technology, car owners can have peace of mind knowing that their engines are safeguarded by the pinnacle of filtration technology. The unparalleled 99.9% efficiency ensures maximum protection against harmful contaminants, promoting optimal engine performance, longevity, and overall vehicle reliability.

Trapping Microscopic Particles

PurePlus® technology, developed by ExxonMobil, represents a significant advancement in synthetic lubricant technology. This revolutionary process produces high-performance base oils with exceptional purity levels. While not directly related to trapping microscopic particles in oil filters, the exceptional purity of PurePlus™ base oils plays a crucial role in maximizing the effectiveness of these filters.

Oil filters are essential components of engines, responsible for removing contaminants from engine oil. These contaminants, including dirt, wear particles, and combustion byproducts, can cause significant engine wear and reduce efficiency. Oil filters typically employ a combination of mechanical filtration and adsorption to trap these harmful particles.

Mechanical filtration involves using a porous material, often a specialized filter paper, to physically block particles larger than the pore size. This mechanism effectively removes larger contaminants but may not capture smaller, equally damaging particles.

Adsorption, on the other hand, utilizes the chemical properties of the filter media to attract and hold onto microscopic particles. Many oil filters incorporate adsorbent materials, such as activated carbon or clay, to enhance their ability to trap these tiny contaminants.

The exceptional purity of PurePlus™ base oils contributes to the longevity and effectiveness of both mechanical filtration and adsorption in oil filters. The absence of impurities in these base oils means fewer contaminants are present in the oil from the outset. This reduced contaminant load allows oil filters to operate more efficiently and for extended periods.

Furthermore, the cleaner base oil environment provided by PurePlus™ technology helps to prevent premature clogging of the filter media. With fewer impurities to contend with, the filter's pores remain open, ensuring optimal oil flow and consistent filtration performance.

In conclusion, while PurePlus™ technology itself does not directly trap microscopic particles, its role in creating exceptionally pure base oils significantly enhances the effectiveness and lifespan of oil filters. By providing a cleaner operating environment, PurePlus™ base oils allow oil filters to perform optimally, maximizing engine protection and longevity.

Longer Oil Life

PurePlus Technology, the revolutionary process that transforms natural gas into a crystal-clear base oil, forms the foundation for longer oil life. This base oil, free from impurities found in conventional crude oil, resists breakdown under extreme heat and stress, contributing to extended oil change intervals.

Complementing this advanced base oil are high-performance oil filters. These filters, often engineered with synthetic blend media, trap and hold a significantly higher volume of contaminants compared to traditional filters. This superior filtration capability ensures the oil remains cleaner for longer, further extending its useful life and contributing to optimal engine performance.

The combined effect of PurePlus Technology and advanced oil filtration translates to less frequent oil changes, saving you time and money without compromising on engine protection.

Engine Protection

PurePlus Technology is a revolutionary process that converts natural gas into a crystal-clear base oil. This base oil is free from impurities found in crude oil, resulting in an exceptionally pure and high-quality product. When used in motor oil formulations, PurePlus Technology helps create lubricants that provide outstanding engine protection, even under extreme conditions.

Engineered to work in perfect harmony with these advanced oils, modern oil filters utilize a combination of synthetic and cellulose-based media. This blend provides superior filtration, capturing microscopic contaminants that can cause wear and tear on engine components. The synthetic media offers exceptional durability and resistance to degradation, ensuring consistent performance over extended oil change intervals. Meanwhile, the cellulose media effectively traps larger particles, preventing them from circulating through the engine and causing damage.

The synergy between PurePlus Technology-based oils and advanced oil filters creates a powerful defense against engine wear. The oil's inherent purity and enhanced lubrication properties, combined with the filter's superior contaminant removal capabilities, work together to keep the engine clean, running smoothly, and protected from premature wear. This translates into improved fuel economy, reduced emissions, and ultimately, a longer engine lifespan.

Environmental Benefits

PurePlus™ technology, employed in [Name of oil filter brand] oil filters, offers significant environmental advantages over conventional oil filters. This cutting-edge technology utilizes a plant-based material, specifically derived from sugarcane, to create a high-performance filter media. This plant-based origin results in a substantial reduction of greenhouse gas emissions during the filter production process compared to traditional, petroleum-based filters.

The environmental benefits extend beyond production. The enhanced efficiency of PurePlus™ technology translates into less frequent oil filter changes. This extended lifespan means fewer used oil filters end up in landfills, lessening the overall environmental impact. Furthermore, the plant-based filter media is designed for easier incineration, offering a cleaner disposal method compared to conventional filters. By choosing oil filters with PurePlus™ technology, consumers actively contribute to a smaller carbon footprint and a more sustainable future for our planet.